ECO - PLA Temperature dependent Red->Yellow - 1.75 mm
Click Image for Gallery
About Filaments by ECO
All material types in the ECO filament range are produced in a sustainable way and made of high-quality granules. The manufacturing process is well tested and controlled which makes the ECO filaments persistent in both shape and diameter. Each spool of filament is packed in a vacuum sealed plastic bag, and is covered and protected by a cardboard box.
This 1.75 mm PLA filament changes its colour when warm (thermochromic). Around 30 °C and up the colour turns from a deep red into an off yellow beige hue. When cooled down, it returns to its original red colour.
General settings for 3D printing with PLA
| Build platform: | Heated build platform (approx. 40–50 °C) is recommended but not required |
| Cooling fan: | Recommended |
| Extrusion temperature: | Approx. 190–230 °C |
We recommend covering the build platform with Blue Painter's Tape for best adhesion.
| Filament | |
| Filament Diameter | 1.75 mm |
| Filament Weight | 1 kg |
| Material Type | PLA |
