Flashforge ABS – Green
The Flashforge ABS filament range consists of filaments in a variety of eye-catching colors. The filament is made with high-quality ABS (Acrylonitrile Butadiene Styrene), which is a very impact resistance and tough thermoplastic polymer.
The spools are specially customized to fit inside Flashforge Dreamer's enclosed build chamber, for a neat and convenient 3D printing experience. However, the filament can be used for printing with any 3D printer model that is capable of printing with ABS.
Properties of ABS
- Oil based
- Impact resistant
General guidelines for 3D printing with ABS
When printing with Flashforge's high-quality ABS filaments, we recommend the following:
- Print with an extrusion temperature of 230–250 ºC.
- A heated build platform is higly recommended when printing with ABS. Set the build platform temperature to approximately 70–110 ºC.
- If your 3D printer features a cooling fan, you will get better results if you turn it off while printing with ABS.
- Cover the build platform with Bule Painter's Masking Tape for a better first layer adhesion.
Each spool of filament is packed in a vacuum sealed plastic bag, and is covered and protected by a cardboard box.
|Filament diameter||1.75 mm|
|Net weight||0.6 kg|
|Recommended print temperature||230-250 °C|
|Size & Weight|
|Shipping weight||0.8 kg|
|Spool diameter||180 mm|
|Spool inner diameter||20.5 mm|